EBITT-CH50
Small Automatic Water Boosters with Cylindrical Vessel Under the Pump
- Description
- Additional information
Description
Identification
CH-100 XHC 8-40
CH: Series (with tank under the pump) 100: Tank Capacity (liters)
XHC 8-40: Pump model
Construction
Compact design, fully automatic, small built-in pressure boosters for household water feeding consisting of;
- Single or three phase, close-coupled pump
- Cylindrical expansion tank with membrane (for single phase)
- Flexible metal hose
- Pressure switch
- Pressure gauge
- 5 way connector
- Float switch against dry running
- 2,5 m cable with plug
- Automatic starter for three phase models.Operation
According to decrease or increase of pressure, the pressure switch determines when the pump will start or stop.
On demand, water is drawn from the tank. When the pressure drops to the Hmstart value the pump starts. When consumption reduces and the pressure increases until it reaches the Hmstop value, the pump is switched off.
Applications
• Water supply
• Garden irrigation (lawn sprinkling)
• Pressure boosting in water systems for domestic use • Washing
• Easy to install
• Compact design
• Low cost
• High efficiency
• High reliability
• Wide performance range
• Service-friendly
• Plug and run design
Specifications
Delivery: up to 12 m3/h
Head: up to 8,5 bar
Power: up to 3 kw
Power supply: 1x 230V +-10% with thermal protector
3 x 400V +-10% with automatic stator Motor starting: D.O.L.
Liquid Temperature: +5C…+40°C Protection Grade: IP54 Frequency: 50 Hz
Insulation Class: F
Constructed in accordance with IEC60034
- WJ: Horizontal, self-priming (jet),cast iron pump
- WTJ: Horizontal, self-priming (jet), stainless steel
- XHC: Horizontal, multistage, fully AISI304 St Steel
- WDM: Horizontal, double stage stainless steel or bronze impeller
Additional information
Brand | Ebitt |
---|